KS 3100i S

The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.

The Könner & Söhnen reliable engine is characterized by increased durability, long and stable operation, and meets all European quality standards, including EURO V.

The ergonomic control panel is equipped with a fuel economy mode switch. This mode reduces fuel consumption by up to 50% at small loads due to lower engine revolutions.

Convenient location of all functions: LED display (hour meter, frequency, voltage), working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, two USB outputs (5V/1A, 5V/2.1A), typical 12 V car socket for a wide range of car devices, gadgets and battery charging, 230 V socket and grounding terminal.

Thanks to a special protective housing, which provides a minimum noise level of 63 dB, the operation of the device will be as comfortable as possible and will not disturb others.

Könner & Söhnen inverter generators are equipped with a robust brushless alternator with 100% copper winding. The high-end compact permanent magnet alternator is housed in a plastic casing and can withstand maximum loads without any damage to ensure long-term and reliable operation of the generator set.

Possibility of parallel connection of two generators for increased total output and possibility of use of more powerful devices. With a cable for parallel connection, which is in a set, you can connect two inverter generators together and get an output power, which is equal to the sum of the rated power of these models.

Generator is equipped with additional accessories: spark plug wrench, filling funnel, parallel connection cable, 16 А Schuko plug, PH2 screwdriver 6.0 mm.